Not yet Run

Print Quote Print RO Print Invoice

Images

Jobs

Start Date	Description	Technician	Amount
2015-10-22	AFTER EXHAUST SYSTEM HAS BEEN REPAIRED THE VEHICLE IS STILL EXPERIENCING A MISFIRE ON CYLINDER #5. TECH SWAPPED COILS TO CYLINDER #4 AND MISFIRE FOLLOWED COIL. TECH RECOMMENDS REPLACING COIL AND RE-CHECKING.	ALEX GALLARDO	$99.30
2015-10-07	COURTESY INSPECTION (FREE)	LOGAN BACKUS	$0.00
2015-10-07	CUSTOMER STATES THE CHECK ENGINE LIGHT IS ON AND THERE MAY BE SOME AFTERMARKET PARTS INSTALLED. PLEASE CHECK AND ADVISE TO MAKE READY FOR PASSING EMISSIONS. RE INSTALL COMPLETE EXHAUST SYSTEM AND INTAKE PIPES.	ALEX GALLARDO	$487.36
2015-11-10	DEALER SUBLET TO FLASH ECM BACK TO STOCK FILE.	LOGAN BACKUS	$123.05
2015-11-11	FLEET RATE BULB REPLACEMENT	LOGAN BACKUS	$7.99
2015-11-11	FLEET RATE BULB REPLACEMENT	LOGAN BACKUS	$7.99
2015-11-11	FLEET RATE BULB REPLACEMENT	LOGAN BACKUS	$7.99
2015-10-07	FLEET RATE SAFETY AND EMISSIONS*	LOGAN BACKUS	$30.00
2015-11-11	FLEET RATE WIPER BLADES	LOGAN BACKUS	$12.00
2015-10-20	TECH FOUND THE EGR PIPE IS BENT TO FIT OLD EXHAUST. THEREFORE IT WAS NECESSORY TO REPLACE EGR PIPE. TECH ALSO FOUND A BOLT WAS BROKEN IN THE INTAKE MANIFOLD WHERE THE EGR ASSEMBLY MOUNTS AND IS LEAKING EXHAUST.TECH DRILLED OUT BROKEN BOLT AND HELI-COILED HOLE AND INSTALLED A NEW BOLT. TECH ALSO FOUND THE THREADS ON THE OLD EXHAUST SYSTEM VERY STRIPPED. TECH CLEANED THREADS AND ADDED ANTI SEIZE.	ALEX GALLARDO	$251.68
2015-11-11	TECHNICIAN FOUND THE BANK 1 SENSOR 1 OXYGEN SENSOR TO BE MELTED TOGETHER DUE TO INCORRECT ROUTING, TECHNICIAN RE WIRED SENSOR AND ROUTED AWAY FROM THE EXHAUST. NOW IS OPERATING AS DESIGNED.	LUKE HARRISON	$78.17
Sub-total			$1,105.53
Shop Supplies			$49.11
Sub-total			$1,154.64
FUEL			$30.00
Total			$1,184.64

* Items marked with a red asterisk are not taxed.

Payments

Total Payments To Date			$1,184.64
Balance Remaining			$0.00

View all Payments for this Invoice

KPI's

You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 1You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'and c.CustomerID=v.CustomerID and v.VehicleID=i.VehicleID and i.InvoiceID = ...' at line 1

KPI	Target	Actual	Gap