Not yet Run

Print Quote Print RO Print Invoice

Images

Jobs

Start Date	Description	Technician	Amount
2017-11-27	COURTESY INSPECTION (FREE) PLEASE CHECK THE FOLLOWING ITEMS; PROBLEM WHEN TURNING, CHECK AXLES, CHECK FRONT END PARTS, CHECK LIGHT OPERATION.	TYLER SPANGLER	$0.00
2017-11-27	CUSTOMER STATES THE CHECK ENGINE LIGHT IS ON, THE ENGINE STALLS AND DIES RANDOMLY BUT MOSTLY AT IDLE. PLEASE CHECK AND ADVISE. TECHNICIAN CHECKED AND WAS ABLE TO DUPLICATE THE CONCERN AND FOUND THERE TO BE A FEW PROBLEMS PRESENT. TECHNICIAN FOUND A SMALL VACUUM LEAK AND REPAIRED, TESTED THE MAP SENSOR AND IDLE SYSTEM. TECHNICIAN MANUALLY ADJUSTED THE IDLE AND TEST DROVE TO FIND THE SYSTEM IS NOW WORKING WELL. THE IDLE IS SET AT ROUGHLY 750 RPMS AND NO LONGER DIES WHEN AT A STOP. TECHNICIAN NOTES IT MAY BE POSSIBLE THE IDLE AIR CONTROL VALVE COULD STILL BE AN ISSUE, BUT RECOMMENDS IT BE DRIVEN TO SEE IF ANY SYMPTOMS RETURN.	LUKE HARRISON	$148.47
2017-12-13	TECHNICIAN FOUND THE POWER STEERING TO BE NOISY, IT SEEMS TO BE COMING FROM THE PUMP. FORD PUMPS ARE FAIRLY TYPICAL FOR NOISE, PUMP COULD BE REPLACED AS ATTEMPT TO QUITE NOISE BUT NO GUARANTEES.	TYLER SPANGLER	$0.00
2017-12-13	TECHNICIAN FOUND THE TURN SIGNALS COMING ON BUT NOT FLASHING, TECHNICIAN RECOMMENDS FIRST REPLACE THE FLASHER AND RE CHECK OPERATION.	RUSSELL HUDSON	$27.79
2017-12-13	TECHNICIAN FOUND THERE TO BE A POPPING TYPE NOISE COMING FROM THE STEERING GEAR BOX AREA WHEN TURNING. TECHNICIAN INSPECTED AND WAS UNABLE TO FIND ANY IMMEDIATE ISSUES AND BELIEVES THE NOISE IS SIMPLY THE FRAME CREAKING AS IT FLEXES FROM THE PRESSURE OF TURNING. TECHNICIAN RECOMMENDS CUSTOMER RETURN IF THE PROBLEM GETS WORSE.	TYLER SPANGLER	$0.00
Sub-total			$176.26
Shop Supplies			$9.69
Sub-total			$185.95
Tax ($6.85%)			$12.07
FUEL			$20.00
Total			$218.02

Payments

Total Payments To Date			$218.02
Balance Remaining			$0.00

View all Payments for this Invoice

KPI's

You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 1You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'and c.CustomerID=v.CustomerID and v.VehicleID=i.VehicleID and i.InvoiceID = ...' at line 1

KPI	Target	Actual	Gap