Not yet Run

Print Quote Print RO Print Invoice

Images

Jobs

Start Date	Description	Technician	Amount
2019-01-02	COURTESY INSPECTION (FREE)	TYLER SPANGLER	$0.00
2019-01-02	CUSTOMER STATES, THE CHECK ENGINE LIGHT IS ON. PLEASE CHECK AND ADVISE. TECHNICIAN NOTES, THE CHECK ENGINE LIGHT CODE IS A P0302 FOR A MISFIRE ON CYLINDER #2. TECHNICIAN SWAPPED SPARK PLUGS AND COILS TO DIFFERENT CYLINDERS AND THE MISFIRE STAYED ON CYLINDER #2 NARROWING IT DOWN TO A VALVE ISSUE OR AN INJECTOR ISSUE. TECHNICIAN CHECKED COMPRESSION ON THE CYLINDER AND FOUND IT TO BE AT 50 PSI, IT SHOULD BE BETWEEN 125-170 PSI. TECHNICIAN RECOMMENDS REMOVING THE VALVE COVER AND INSPECTING FOR DAMAGE.	TYLER SPANGLER	$0.00
2019-01-18	ENGINE - ****SPECIAL INSTRUCTION FOR NEW ENGINE REPLACEMENT, ENGINE OIL AND FILTER MUST BE REPLACED AT THE FIRST 1,000 MILES (LUBE STICKER HAS BEEN SET ACCORDINGLY). FOLLOWING THE FIRST SERVICE, REGULAR INTERVALS ARE REQUIRED. CUSTOMER IS ALSO REQUIRED TO BRING THE VEHICLE BACK IN AT THE FIRST 1,000 MILES FOR AN ENGINE RE CHECK TO VERIFY BREAK IN AND OVERALL CONDITION.******	TYLER SPANGLER	$0.00
2019-01-16	ENGINE INSTALL KIT. (WATER PUMP, SPARK PLUGS, THERMOSTAT, BELTS, HOSES, PCV VALVE, IGNITION CABLES, FUEL FILTER, AIR FILTER).	TYLER SPANGLER	$462.50
2019-01-16	PLEASE REPLACE ENGINE ASSEMBLY WITH USED ENGINE. THIS REPAIR WILL CARRY A 6 MONTHS PARTS AND LABOR ONLY WARRANTY. THIS REPAIR RECOMMENDS THE USE OF AN ENGINE INSTALL KIT.	TYLER SPANGLER	$2,983.24
2019-01-29	PLEASE REPLACE THE CLUTCH AT TIME OF ENGINE REPAIRS.	TYLER SPANGLER	$267.53
Sub-total			$3,713.27
Hazardous Materials Disposal			$48.26
Shop Supplies			$49.11
Sub-total			$3,810.64
Tax ($6.85%)			$254.36
Total			$4,065.00

Payments

Total Payments To Date			$4,065.00
Balance Remaining			$0.00

View all Payments for this Invoice

KPI's

You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 1You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'and c.CustomerID=v.CustomerID and v.VehicleID=i.VehicleID and i.InvoiceID = ...' at line 1

KPI	Target	Actual	Gap