Not yet Run

Print Quote Print RO Print Invoice

Images

Jobs

Start Date	Description	Technician	Amount
2019-05-13	BG - SYNTHETIC REAR DIFFERENTIAL SERVICE	DALLAS MCINTYRE	$149.99
2019-05-09	COURTESY INSPECTION (FREE)	DALLAS MCINTYRE	$0.00
2019-05-09	CUSTOMER REQUEST TO INSPECT THE NOISE DAMPENING PAD ABOVE THE TRANSMISSION ONCE THE TRANSMISSION IS OUT. TECHNICIAN NOTED THE PIECE IS DAMAGED AND RECOMMENDS REPLACEMENT. 3-5 DAYS OUT ON STANDARD ORDER ($20 EXTRA TO OVERNIGHT)	DALLAS MCINTYRE	$155.00
2019-05-13	PLEASE INSPECT AND ADJUST PARK BRAKE TO IMPROVE FUNCTION.	DALLAS MCINTYRE	$30.65
2019-06-04	PLEASE INSTALL CUSTOMER SUPPLIED FRONT DRIVE LINE.	DALLAS MCINTYRE	$51.09
2019-05-13	PLEASE TOP OFF THE ANTIFREEZE AND THE POWER STEERING FLUIDS.	DALLAS MCINTYRE	$0.00
2019-05-13	TECHNICIAN NOTES; PARK BRAKE IS HOLDING BUT COULD USE AN ADJUSTMENT, ENGINE OIL HAS NO INDICATION OF LAST SERVICE BUT FLUID IS FULL, TRANSMISSION FLUID IS DARK AND BURNT, ENGINE ANTIFREEZE IS A LITTLE LOW, POWER STEERING FLUID IS A LITTLE LOW, AIR FILTER IS DIRTY, SERPENTINE BELT IS STARTING TO CRACK, DRIVERS SIDE BATTERY IS TESTING MARGINAL, PASSENGER SIDE BATTERY IS TESTING GOOD, BATTERY TERMINALS NEED TO BE CLEANED, EXHAUST SYSTEM IS RUSTED OUT, FRONT BRAKE PADS ARE AT 5/32", REAR BRAKE PADS ARE AT 3/32", REAR DIFFERENTIAL FLUID IS DARK AND HAS METAL CHUNKS ON MAGNET, TRANSFER CASE FLUID IS VERY DARK, HOOD SHOCKS ARE WEAK.	DALLAS MCINTYRE	$0.00
2019-05-13	TRANSFER CASE SERVICE (SYNTHETIC)	DALLAS MCINTYRE	$103.79
2019-05-07	TRANSMISSION - DIESEL - DODGE TRANSMISSION 47RE/48RE COMPLETE STOCK RE-BUILD WITH RELIABILITY UPGRADES. ALSO INCLUDED IN THIS BUILD IS TO REMOVE THE ONE WAY CHECK VALVE IN ORDER TO ENSURE CONSTANT FLOW THROUGH THE COOLER. TRANSMISSIONS WITH MORE THAN 100K MILES WILL ALSO REQUIRE A NEW VALVE BODY IN ADDITION TO THIS REPAIR (COMES WITH NEW GOVERNER PRESSURE SENSOR AND TRANSDUCER). THIS BUILD PRICE IS FOR WEARABLE ITEMS AND UPGRADED PARTS COMMON ON MOST BUILDS HARD PART DAMAGE WILL REQUIRE ADDITIONAL COSTS THAT CAN ONLY BE DETERMINED ONCE TRANSMISSION IS DIS ASSEMBLED. ****SPECIAL NOTE **** CUSTOMER HAS ALREADY REPLACED THE VALVE BODY AND GOVERNOR PRESSURE SENSOR AND TRANSDUCER, CUSTOMER HAS ALSO REPLACED OTHER BILLET PARTS. CUSTOMER IS UPGRADING THE BUILD TO BE EQUIVALENT TO A STAGE 1 BUILD. DETAILS ON THE BUILD ARE LISTED IN THE PARTS SECTION. LUKE HAS AGREED TO PROCEED WITH THE BUILD USING THESE EXISTING PARTS AND UPHOLD A WARRANTY EQUAL TO A STAGE 1 WARRANTY WHICH IS RATED TO 550 HP.	LUKE HARRISON	$3,133.00
2019-05-17	UPON COMPLETION OF THE TRANSMISSION BUILD TECHNICIAN TEST DROVE AND FOUND THERE TO BE A CHECK ENGINE LIGHT COMING ON WITH A CODE P1755 FOR A FAULT WITH THE TRANSMISSION THROTTLE VALVE CIRCUIT. TECHNICIAN ALSO FOUND CODE P0483 FOR COOLING FAN SPEED CIRCUIT FAILURE. TECHNICIAN FOUND PLUG CAVITY FOR THE COOLING FAN FULL OF CORROSION. TECHNICIAN CLEANED CORROSION AND APPLIED ELECTRIC GREASE AND THE FAN CONNECTION IS NOW GOOD AND FAN CODE IS NOT RETURNING. TECHNICIAN PERFORMED DIAGNOSIS ON THE THROTTLE VALVE CODE AND FOUND THERE IS AN INTERNAL FAULT IN THE ENGINE CONTROL MODULE. TECHNICIAN INFORMED CUSTOMER AND CUSTOMER HAS DECIDED TO LINE UP A REPAIR THROUGH A CUSTOMER CHOSEN FACILITY FOR THE ECM TO BE REFURBISHED. CUSTOMER IS ONLY PAYING ABSOLUTE AUTOMOTIVE FOR DIAGNOSIS, TO REMOVE AND RE INSTALL THE ECM, AND SHIPPING COSTS. CUSTOMER HAS ARRANGED ECM REPAIR AND IS PAYING FOR THAT SEPARATELY ON THEIR OWN.	LUKE HARRISON	$204.34
Sub-total			$3,827.85
Hazardous Materials Disposal			$48.26
Shop Supplies			$49.11
Sub-total			$3,925.22
Tax ($7.25%)			$277.52
ECM SHIPPING			$15.00
OVERNIGHT FREIGHT FOR FLOOR PAN SILENCER			$20.00
Total			$4,237.74

Payments

Total Payments To Date			$4,237.74
Balance Remaining			$0.00

View all Payments for this Invoice

KPI's

You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '' at line 1You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near 'and c.CustomerID=v.CustomerID and v.VehicleID=i.VehicleID and i.InvoiceID = ...' at line 1

KPI	Target	Actual	Gap