Absolute Car Care - Job 120757

- Welcome

Logout

Job #120757 for (Wade Thomson)
2006 Chevrolet SILVERADO 2500HD
Invoice #21259

Technician:
Concern:	DIESEL - DURAMAX PLEASE REMOVE CYLINDER HEADS AND INSPECT FOR DAMAGE. CLEAN CHECK AND MILL CYLINDER HEADS AND RE INSTALL USING NEW GASKET SET. ARP HEAD STUDS ARE RECOMMENDED AT TIME OF REPAIR AND WILL BE AN ADDITIONAL COST. ESTIMATE FOR REPAIR MAY CHANGE DEPENDING UPON EXTENT OF DAMAGE ONCE DIS ASSEMBLED. TECHNICIAN DIS ASSEMBLED CYLINDER HEADS AND FOUND THERE TO BE A SMALL NICK ON THE PISTON FOR CYLINDER #8, TECHNICIAN NOTED THIS IS THE CYLINDER THAT IS CAUSING THE BUILD UP OF COMBUSTION PRESSURE INTO THE COOLING SYSTEM. TECHNICIAN NOTED THE CYLINDER HEAD CAME BACK FROM MACHINE SHOP AS TESTING GOOD, THE ENGINE BLOCK PASSES A STRAIGHT EDGE INSPECTION, TECHNICIAN LOWERED PISTON TO ITS LOWEST POINT TO HONE CYLINDER AND CLOSER INSPECT. TECHNICIAN WAS UNABLE TO FIND A CERTAIN FAULT AND REASON FOR THE PRESSURE IN THE COOLING SYSTEM. DUE TO THESE FACTS TECHNICIAN CANNOT GUARANTEE THE REPAIR OF CONTINUING WITH HEAD GASKETS. TECHNICIAN BELIEVES THERE IS A GOOD POSSIBILITY OF A CRACK IN THE UPPER PORTION OF THE CYLINDER WALL THAT IS INVISIBLE TO THE NAKED EYE. TECHNICIAN RECOMMENDS THE ENGINE SHORT BLOCK BE REPLACED IN ORDER TO GUARANTEE A QUALITY REPAIR. THIS REPAIR IS TO INSTALL A FACTORY REMAN LONG BLOCK WHICH WILL CARRY A 3 YEAR 100,000 MILE WARRANTY.
Discount:	Percentage Dollar
Repair:	REMOVE CYLINDER HEADS INSPECT AND REPAIR. IF INJECTORS OR TURBO ARE IN QUESTION IT WILL BE REQUIRED TO SEND OUT FOR TESTING AT THIS TIME AT AN ADDITIONAL COST.
StartDate:
EndDate:
Tax this Job?

Parts and Labor

Description	Quantity	List	Total	Delete?
LABOR	38.60	$95.00	$3,667.00	X
DEX- EQUIVALANT COOLANT - EXTENDED LIFE UNIVERSAL RED	3.50	$15.99	$55.97	X
MAG 1 ENGINE OIL 15W-40	12.00	$4.99	$59.88	X
ENGINE OIL FILTER	1.00	$14.99	$14.99	X
HEAD GASKET SET WITHOUT HEAD GASKETS	1.00	$502.28	$502.28	X
CYLINDER HEAD GASKET	2.00	$77.38	$154.76	X
CLEAN CHECK AND MILL CYLINDER HEAD	1.00	$300.00	$300.00	X
THERMOSTAT SET 180 AND 185	1.00	$92.84	$92.84	X
BELT	1.00	$75.23	$75.23	X
RE MANUFACTURED LONG BLOCK ASSEMBLY	1.00	$7,445.00	$7,445.00	X
Total			$12,367.95

Add a Part or Labor for this Job